S. K Industrial Products

• Body:Ductile Iron
• Size:DN20 - DN50
• Seat Seal:Ductile Iron
• Stem:Stainless Steel
• Temprature:0 - 120°C
• Working Pressure:PN 16 PN 25 125/150/250PSI
• Ends:EN 1092-2, ANSI B16.10

• Model:PLF
• Body:CF8 / CF8M
• Size:1/2" to 4"
• Seat:NBR / VITON
• Temprature:80 °C (For Water), 180 °C (For Steam)
• Max Inlet Pressure:21 BAR (High Pressure On request)
• Pressure Adjusting Range:0.5 ~ 10 BAR , 10 ~ 20 BAR
• End Connection:Screwed End / Flanged End 150 Class

• Model:PDV-T
• Body:CF3M
• Size Range:1/2" to 4" Triclover End / Screwed End / Flanged End
• Bonnet:CF3M
• Diaphragm:PTFE / NBR / EPDM
• Temprature:up to 160 °C
• Pressure:6 to 8 BAR
• End Connection:Triclover End / Screwed End / Flanged End

• Model:PTF
• Body:WCB / CF8 / CF8M
• Size:1/2" to 4"
• Bonnet:WCB / CF8 / CF8M
• Seat:Metal to Metal
• Temprature:up to 300°C
• Pressure:0 to 20 BAR (High Pressure On request)
• End Connection:Screwed End / Flanged End

• Model:PDPVY
• Size:1/2" to 4"
• Diaphragm:Rubber / Teflon
• Seals:Rubber / Teflon
• Actuator:Double & Single Acting
• Temprature:Upto 80°C
• Pressure:Upto 5 Kg/Cm²
• Ends:TC End

Capitalizing on the ability of our skilled personnel, we are keenly instrumental in delivering a comprehensive array of Gate Valve.

• Body : Bonnet Astm A 216 Gr Wcb | Cf8 | Cf8M | Cf3 | Cf3M
• Trims:13 Cr | 18 Cr 8 Ni
• Mfg Std:Api 600
• Insp & Test Std:Api 598
• Ends:Flanged To Asme B 16.5 Rf
• Operation:Manual | Gear | Electrical Actuated
• Hyd-Test Pressure: Body : 425 Psig (30 Kg/Cm ²),Seat : 300 Psig (21 Kg/Cm ²)
• Size Range:25 Mm To 300 Mm

• Body:M.S. Pressed
• Actuator Type:Diaphragm Single Acting
• Actuator Action:Direct / Reverse Acting, Normally Open/Normally Close
• Operating Pressure:1.4 to 4.5 BAR

• Size Range:1/2″ to 8″
• Body:Cast Iron / Cast Steel / S.S.304 / S.S.316
• Lining Material:Ebonite/EPDM/Glass/PFA
• Diaphragm:Neoprene / Teflon Backed with Neoprene / Butyl / Viton / EPDM / Hyplon / Nitrile
• Pressure:up to 5 Bar
• Testing Standard:BS 6755 – Part I
• Temperature:-30°C to 80°C
• Leakage Rate:As Per ANSI B 16.104 Class VI(100% Leak Tight)

• Model:QSDA
• Body:Aluminium
• Size Range:1/2” to 3”
• Diaphragm:NBR / Viton
• Temprature:up to 80°C (High Temperature 125°C on Request)
• Pressure:0.6 to 8.5 Bar
• Coil Voltage:12V, 24V, 48V, 110V, 230V, AC/DC
• Coil Insulation:“F” Class
• Coil Encloser:IP 67
• Ends:Screwed End

• Model:2AD-HR-5 & 6
• Seals:Nitrile
• Media:Air (Filtered & Lubricated)

• Model:KPL
• Body:CF8 / CF8M / CF3M
• Size:1/2" to 1"
• Seals:NBR / Viton / EPDM
• Temprature:85°C
• Pressure:0.5 to 5 BAR
• Coil Insulation:"F" Class
• Ends:Screwed / Flanged

• Model:2AD-HR-5 & 6
• Size:1/4”,1/2”
• Body:Aluminium Anodized
• Seals:Nitrile
• Pressure:0 to 10 Kg/Cm²
• Temp:5 to 55°C
• Leakage:Bubble Tight
• Media:Air (Filtered & Lubricated)

• Model:3AD-HR-5
• Size:1/4”,1/2”
• Body:Aluminium Anodized
• Seals:Nitrile
• Pressure:0 to 10 Kg/Cm²
• Temp:5 to 55°C
• Type:PAN | PHN | PRN
• Leakage:Bubble Tight
• Media:Air (Filtered & Lubricated)

• Model:UKL
• Body:Forged Steel / WCB
• Bonnet:Forged Steel / WCB
• Seals:Graphite
• Leakage:Class VI
• Temprature:400°C
• Pressure:40 Kg/Cm²
• End Connection:Screwed / But Weld / Socket Weld / Flanged 150 & 300#

• Body | Cover:Astm A 216 Gr Wcb | Cf8 | Cf8M | Cf3 | Cf3M
• Trims:13 Cr | 18 Cr 8 Ni
• Mfg Std:Bs 1868
• Insp & Test Std:Bs 6755
• Ends:Flanged To Asme B 16.5 Rf
• Operation:Automatic
• Hyd-Test Pressure Body : 1100 Psig (77 Kg/Cm ²)
• Seat : 800 Psig (56 Kg/Cm ²)
• Size Range:25 Mm To 300 Mm

• Model:HNV
• Body:S.S. 304
• Size Range:1/4" to 1/2"
• Bonnet:S.S. 304
• Seals:Metal to Metal
• Temprature:100 °C
• Pressure:200 Kg/Cm²
• Media:Air, Water, Oil & Gas
• Ends:Screwed End (F)

• Model:FVT
• Body:CF8
• Size Range:1/2" to 6"
• Parts:CF8
• Temprature:Upto 85°C
• Pressure:12 Kg
• Media:Water
• Ends:Screwed / Flanged

• Model:CSDA
• Body:IC CF8 / CF8M
• Size:1"
• Seals:P.U.
• Temprature:NBR: 85°C / Viton: 125°C
• Pressure:0.6 to 8.5 Bar Max.
• Coil Rating:F Class
• Ends:Screwed

• Model:GMS / GMF
• Body:CF8 / CF8M / CF3M
• Size:1/2" to 4"
• Bonnet:CF8 / CF8M
• Seat:PTFE
• Temprature:220 °C
• Working Pressure:Up to 10 BAR
• End Connection:Screwed End / Flanged End 150 Class

• Optimum strength
• Corrosion